in this article
What is a combination boiler?
A combi boiler, short for combination boiler, is a type of boiler that is designed to provide both space heating and domestic hot water. Combination boilers do not need a separate water tank or cylinder. By using condensing technology to heat water on demand, you save spend less energy and also save money.
Combi boilers are a popular choice in homes without basements and are the most common type of boiler found in the United Kingdom. However, they may not be suitable for large homes or those with high hot water consumption. It’s best to consult with a professional heating contractor to determine if a combi boiler is the right choice for your home.
How does a combi boiler work?
The conventional arrangement is to have a normal boiler that heats the radiator through a sealed water circuit. The storage cylinder has a hot coil in it to heat the water through which the radiator water flows. A combi boiler heats the water only when a hot tap or shower is turned on. This ensures the maximum efficiency of the boiler. The hot water is delivered to the taps with pressure so that you can enjoy your shower.
Why install a Combi Boiler?
- A combi boiler uses hot water from your taps or shower.
- Combi boilers are available in gas, electricity, or oil, depending on your fuel preference.
- A combi boiler can easily fit into most kitchens or storage cupboards.
- Combi boilers are reliable, convenient and easy to use
- Combination boiler can generally save you money on installation.
- Unlike the conventional boiler, combi boilers provide on-demand heating to your radiators and hot water.
- A combi boiler is economical and practical. High-efficiency boilers reduce your energy bills.
- Installing a combi boiler can be a bit difficult because the system gets added to your water mains, but they are much more likely to fit into your home because of their smaller size. The installation can also be more costly than system boilers connected to an old boiler system.
When do you need to install a new one?
Boilers can last up to 15 years, and if your boiler is reaching that age, then it’s time to get a new one. To ensure the best lifespan, annual services and maintenance are mandatory. But the older they get, the risk of malfunctions increases, especially if the boiler was not installed properly.
Purchasing a new combi boiler is one thing, but installing it is a whole different story. While you can always hire someone to do the new combi boiler installation for you, taking the DIY approach can save you quite a bit of money. But before you actually dive in and start installing the boiler, there are several factors that you’ll need to consider.
Combi boilers are relatively compact, so they’re perfect for smaller spaces. But this can also make the installation aspect of it a bit trickier too. You will need to consider whether or not you want to purchase a fitter separate from the manufacturer or simply purchase it as an “all-in-one” option.
If you aren’t sure how to install a combi boiler, then it might be wise to invest in a secure boiler installation company because you could damage your newly bought combi boiler. If you absolutely have your heart on installing the boiler yourself, you need to do proper research on the correct installation techniques.
Most common combination boilers problems
- Faulty automatic air vent.
- The buildup of limescale in central heating pipes can lead to blockages and temperature fluctuation of hot water taps.
- Faulty or blocked pressure relief valve. This may cause dripping from pipes.
- Pump failure leaves you with no heating or hot water.
- Faulty diverter valves may get stuck on hot water or central heating.
- Rust causes leakage in water pipes and results in the loss of water pressure.
These are the problems or common malfunctions faced in combi boilers, but they are easy to overcome by regular maintenance.
The fitting of a boiler can be tricky, and faulty boiler installations are one of the most common malfunctions in DIY systems.
Can I install a combi boiler myself?
It is not recommended to install a combi boiler by yourself as it can pose a serious safety risk, breach building regulations, and result in loss of warranty. Boilers are complex and require a Gas Safe Registered engineer to install them, which ensures the competence of the installer. DIY boiler installation may seem like a cost-saving approach, but it may cost thousands of pounds in the long term. Therefore, it is best to get a qualified engineer to handle boiler installation.
If you want the most secure information on how to install a boiler, then you should consult with the supplying company and get the best and most modern installation instructions that will make your installation process a breeze.
Combi boiler installation steps
Installing a combi boiler on your water mains is no simple task, and you should take careful consideration before you attempt to do it yourself.
Let’s take a look at the steps involved with installing a combi boiler:
Read the instructions manual
- First, read the instruction manual completely.
- Second, study the installation diagrams to understand how the system should look after it has been installed.
- Then lay out all of the materials that you’ll need to work with and familiarise yourself with all of them.
- Finally, make sure that you have all the required components in place and understand what each one does before using it.
Figure out where everything goes.
- Figure out where everything is going to be placed about everything else.
- Decide about the exact position of your new radiator.
- Make sure that these elements have plenty of space around them.
- You will also need all the relevant sealants to ensure that there is no leakage inside your walls that could end up damaging your property.
Know the pipe routes.
- When installing new radiators, you need to learn about the pipe routes in your home.
- Knowing the pipe routes will ensure that the combi boiler gets installed the right way with minimal issues.
- Knowing the pipe routes also ensures that the combi boiler installation benefits both the bathroom and kitchen.
Fit the boiler into the wall.
- This is probably one of the more time-consuming aspects of the installation, mainly because you want to ensure it’s done right!
- Take extra caution to ensure that the fittings are secured, and don’t forget to turn off all of the electricity and water before taking this important step.
Get your radiator installed.
- If you want to heat your home effectively, you must choose the most appropriate radiators for your property.
- All radiators are compatible with combi boilers.
- A wide range of radiators will help you heat up from the smallest to the largest of rooms.
- Large open-plan kitchens and living rooms might require an additional radiator to provide effective heat.
A new radiator will require a small amount of air ventilation once you have successfully installed everything. To do this, you should :
- Bleed each valve by turning the key or valve located at the bottom.
- Do this until a small number of water spills over the top of the unit.
As you can see, installing a combi boiler isn’t exceptionally difficult. By following the tips in this article, you should be able to have it installed in a relatively short amount of time and with a minimal amount of hassle. The most difficult part about this type of installation is figuring out the combi boiler pipework, especially if your home’s pipework is built into the walls.
How to find a professional boiler fitter
Even though the cost of combi boiler fitting can be high and it might be tempting to take a DIY approach, hiring a Gas Safe combi boiler installer to handle the job is always a safer option. The best way to save money is by requesting at least 3 quotes from trusted heating engineers. At Homeadviceguide, we can help you save time and money by getting you in touch with combi boiler fitters to help you with your combi boiler replacement project.
View the video below to understand better things you need to consider before you attempt to install a combi boiler. We think it is quite useful.
Check out this construction statistics guide for an in-depth look at the construction industry.